Hello World from OSS Silicon Valley

_ Prerequisite

(None)

_ Install&Setup

Step.1

Download Image file from Rasberry Pi Official Web site

Step.2

Copy image file into micro SD card.

Step.3

Insert micro SD card into Rasberry Pi and boot it.

Step.4

Expand Filesystem from "1 Expand Filesystem" in raspi-config menu.

Step.5

Change User password from "2 Change User Passowrd" in raspi-config menu.

Step.6

Enable Boot Desktop/Scratch from "3 Enable Boot Desktop/Scratch" in raspi-config menu.

Step.7

Change Locale from "4 Internationalisation Options" in raspi-config menu.

Step.8

Change Timezone from "4 Internationalisation Options" in raspi-config menu.

Step.9

Change Keyboard Layout from "4 Internationalisation Options" in raspi-config menu.

Step.10

Setup network interface.

$ sudo vi /etc/network/interface

auto lo 
iface l0 inet loopback

auto eth0
allow-hotplug eth0
iface eth0 inet static
address 192.168.1.1
netmask 255.255.255.0

auto wlan0
allow-hotplug wlan0
iface wlan0 inet manual
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf

#auto wlan1
#allow-hotplug wlan1
#iface wlan1 inet manual
#wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf

_ HowToUse

_ Remote Desktop from Windows PC

Step.1

Install xrdp

$ sudo apt-get install xrdp

Then you will be able to connect with Rasberry PI via "Remote Desktop".

_ Rasberry PI Camera

Step.1

Connect Rasberry PI Camera with Rasberry PI and launch raspi-config

$ sudo raspi-config

Step.2

Enable Camera from "5 Enable Camera" in raspi-config menu.

Step.3

Reboot the system and check if the camera is recognized on Rasberry PI from the following commandline.

$ raspistill -v -o test.jpg

_ Author

S.Yatsuzuka